|
|||||||
At the moment the part with sound from the AY-3-8910, which is compatible with the Mockingboard is finished..... the part with the SSI263A is completed and it will be kept sompatible with the existing cards of this type... the part with the cheaper and easier to get SP1000 and the part with the ADC0832 will be able to perform speech and speechrecognition ! ..... so at the moment the parts printed above in red ink are completed in the circuitplan and the card-layout will be completed tommorow..... at the moment i just can state that i have to enlarge the card quite a bit to fit all the stuff allready realized in the circuitplan on the card.... but just at this moment that card will allready knock off any competetion with any of the other existing cards that has ever been designed for the apple II series ..... i was now forced to enlarge the sheet for the circuitplan up to the scale of DIN A2 just even to fit with the plan at the moment if that plan is to be kept readable.....
|
|||||||
|
|||||||
|
|||||||
For better readability download the current circuitplan as PDF-File | |||||||
due to european laws
and german court decision: I hereby declare no responsibility to any "deep links" resulting from the links in this page. I have no influence to the pages linked hereby in this page and the contents in those pages. I therefor canīt take any kind of responsibility to contents in the pages, where these links direct the readers browser to nor to the contents resulting from following up links from those pages. The reference to contents by this links is dependent ro the status of the date when the links have been set ( April 2013 ) and it might occur that references and contents may change by the fact that domains may have been discontinued from their former owners. In such cases i canīt take any kind of responsibility to the changed contents. this is specialy valid to banners, advertisements or merchandising links in the targeted pages.
|